Power Supplies

Power Supplies

Jupiter-MM-7000 Series

The JMM-7000 family provides compact, rugged, MIL-compliant DC power in the popular PC/104 form factor (3.6 x 3.8"/90 x 96 mm). JMM-7000 models offer compliance to a range of standards, including MIL-STD-461, MIL-STD-704, MIL-STD-1275, MIL-STD-810G, and DO-160. Optional 500V isolation, brownout protection, and supercapacitor-based UPS enhance these supplies' utility in compact airborne, land, and sea vehicle electronic systems.

The JMM 7300 series provides full MIL standards compliance The depopulated JMM 7000 series are intended for use in commercial industrial applications where backup power or isolated power is required

Jupiter-MM-7000 Series

Jupiter-MM

This rugged, extended-temperature DC/DC power supply is designed specifically for air and ground vehicle applications. It consists of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, heat sink, input and output connectors, power-good indicator lamps, and both 8-bit and 16-bit PC/104 bus headers. Input voltage range is 7 to 34VDC, making it suitable for use with both 12V and 24V systems.

Jupiter-MM

Specifications

Input
Input voltage 7-34VDC
Input ripple <100mV RMS
Transient protection 1500W transient voltage suppressor
Transient cutoff 31V nominal
Output
Output voltage/current JMM-512: +5V at 10A max, +12V at 2.0A max
JMM-512-V512: +5V at 10A max, -5V at 0.15A max, +12V at 2.0A max, -12V at 0.8A max
Output protection Current limit/short circuit protection
Output ripple <50mV RMS (+5V output, 50% load)
Load regulation ±3%
Efficiency 80% to 92%, varies with load and input voltage
Mechanical/Environmental
Size 3.55" x 3.775"
PC/104 bus J1 (64 pins) and J2 (40 pins) stackthrough connectors installed
Operating temperature -40°C to +85°C
Operating humidity 5 to 95% non-condensing
Weight 5.0 oz/142g
MTBF JMM-512: 107,941 hours
JMM-512-V512: 87,569 hours

Jupiter-MM-LP

Jupiter-MM-LP (JMM-LP) is a low-cost DC/DC power supply ideal for PC/104 applications with lower power requirements. This supply is the lightest-weight PC/104 DC/DC supply available anywhere, due to the fact that it requires no heatsink. Extended temperature rating is included at no additional charge, making Jupiter-MM-LP a true bargain compared to competitive products that require an additional charge.

Jupiter-MM-LP

Specifications

Input
Input voltage 7-30VDC
Input ripple <200mV RMS
Transient protection 1500W transient voltage suppressor
Transient cutoff 31V nominal
Output
Output voltage/current +5VDC +/-5%
Output protection Current limit/short circuit protection
Output ripple <50mV RMS (+5V output, 50% load)
Load regulation ±3%
Efficiency 80% to 92%, varies with load and input voltage
Mechanical/Environmental
Size 3.55" x 3.775"
PC/104 bus J1 (64 pins) and J2 (40 pins) stackthrough connectors installed
Operating temperature -40°C to +85°C
Operating humidity 5 to 95% non-condensing
Weight 4.0 oz / 113g

Jupiter-MM-5000

Jupiter-MM-5000 high-efficiency, high-precision 218W power supplies consist of a PC/104 form factor module with complete DC-DC voltage regulator circuitry, integrated thermal solution, detachable screw terminal block I/O connections, and PC/104 bus connectors. The wide input voltage range of 7 to 34VDC is compatible with industry standard 12V, 24V, and 28V inputs.

Jupiter-MM-5000

Specifications

Input
Input voltage 7-34VDC
Input Protection Over / under voltage, reverse polarity, surges, transients, reflected noise
Output
Output voltage/current +5V at 20A maximum
+12V at 8A maximum
+3.3V at 5A maximum
+5V standby at 1A maximum
+3.3V standby at 0.1A maximum
Output protection Current limit and short circuit protection
Load regulation ±0.8%, Vmin to Vmax, 0-100% load on all outputs, -40°C to +85°C
0.35% maximum output voltage droop at 5V output, 0-20A load, VIN = 12V, TA = 25°C
Output ripple 44mV peak-to-peak maximum
12mV peak-to-peak at 5V output, 0-20A load, VIN = 12V, TA = 25°C
Efficiency 92-94% at 5V output, 0-20A load, VIN = 12V, TA = 25°C
Transient load response +/-72mV at 5V output, 25-75% load step, 2.5A/usec ramp rate, VIN = 24V, TA = 25°C
Temperature stability +/-0.5% at 5V output, 10A load, VIN = 24V, TA = -40°C to 85°C
General
On / off Remote or programmable on/off logic input
Dimensions PC/104 form factor
3.55 " x 3.775" (90mm x 96mm)
not including screw terminals
Maximum height 0.435" (11mm) above PCB top surface
Bus connection options 16-bit stackthrough ISA bus
32-bit PCI bus
Operating temperature -40°C to +85°C (-40°F to +185°F)
Operating humidity 5% to 95% non-condensing
Weight 6.3oz (179g) with heat sink
8.1oz (230g) with heat spreader
RoHS Compliant

Ethernet Switches

Ethernet Switches

EPSM Ethernet Switch Modules

Our EPSM Epsilon Ethernet switch modules provide compact off-the-shelf solutions that eliminate 95% of the design effort and risk for a custom managed Ethernet switch. Customers have the flexibility to define their own form factor and connectors while enjoying vastly reduced development time and cost.

epsm10gx

Specifications

Model Copper Ports Fiber Ports Form Factor Dimensions Notes
EPSM-12G2F 24x 1G 2x 1G/2.5G COM Express Mini 84 x 55mm / 3.3 x 2.2in Switch module for custom solutions; Layer 3 and IEEE-1588 capability
EPSM-10GX 24x 1G 2x 10G COM Express Mini 84 x 55mm / 3.3 x 2.2in Switch module for custom solutions; Layer 3 and IEEE-1588 capability
EPSM-10GX4 24x 1G 4x 10G COM Express Mini 84 x 55mm / 3.3 x 2.2in Switch module for custom solutions; Layer 3 and IEEE-1588 capability

SABRE Rugged Ethernet Switches

The SABRE family of rugged Ethernet switches provide guaranteed reliability in the most challenging vehicle environments. MIL-STD-461, 704, and 1275 compliance is available. Systems have been tested to MIL-STD-810G specifications up to 75G shock.

sabre-rugget-ethernet

Specifications

ETHERNET SWITCHES SabreNet 12000 SabreNet 24000
Copper ports 12x 1G 24x 1G

4x 10G

Fiber ports   4x 10G [Optional]
Input voltage 6-34VDC 5-34VDC
PTP option Yes Yes
Dimensions in 6.4Wx5.4Dx2.6H 7.8Wx6.9Dx2.6H
Dimensions mm 162Wx137Dx66H 198Wx175Dx66H

EPS-12G2

The Epsilon-12G series is a family of managed Layer 2+ Ethernet switches offering twelve 10/100/1000Mbps copper twisted pair ports and up to two 1G/2.5G small form factor pluggable (SFP) sockets in a rugged single board solution. Epsilon-12G2 is designed for rugged applications including industrial, on-vehicle and military.

EPS-12G2

Specifications

Managed Ethernet Switch
Switch Type 14-port, Layer 2+ switch
Built-in MIPS 416MHz 24KEC microcontroller for configuration and management
Number of Ports 12 10/100/1000Mbps Ethernet ports with non-blocking wire-speed performance
1 1G SFP socket; 1 2.5G SFP socket
On-board Memory 4Mb packet memory
Shared memory buffer with per-port & CoS memory management
MEF Hierarchical MEF compliant policing & scheduling
MEF E-Lane, E-Line, and E-Tree services
Frame Buffer Jumbo frame support at all speeds
VLAN IEEE 802.1Q VLAN switch with 8K MACs and 4K VLANs
Push/pop up to two VLAN tags
Independent & shared VLAN learning (IVL, SVL)
Multicast IPv4 and IPv6 multicast group support
Remarking Dual leaky bucket policers with remarking and statistics
Classifier 8 priorities and 8 CoS queues per port with strict or deficit-weighted round robin scheduling
Shaping/policing per queue and per port
Storm Control Policing with storm control and MC/BC protection
Link Aggregation IEEE 802.3ad
Security Advanced security and prioritization available though multistage TCAM engine
RSTP Rapid Spanning Tree Protocol (IEEE 802.1W) and MSTP
MIBs Support for both WebStax and CEServices MIBs
Power Management ActiPHY and PerfectReach power management
VeriPHY cable diagnostics
Serial Port 1 RS-232 port for host interface
Indicator LEDs 24 status LEDs, two per port
2 general purpose
Standalone Capable Standalone network switch, or in combination with a host computer
General
Power Input +5 to +40V DC/DC power supply
Power Consumption 9.2W maximum with all ports active
Form Factor COM Express (95 x 125mm)
Operating Temperature -40°C to +85°C (-40°F to +185°F)
Weight 4.9oz (138.9g) with heatsink
MTBF 122,656 hours
RoHS Compliant

EPSM-12G2F

EPSM-12G2F is a managed Ethernet switch module in an ultra-compact 2.2" x 3.3" (55 x 84mm) size offering 24 10/100/1000Mbps copper ports and 2 1-2.5Gbps SFP ports. It supports an embedded software package offering a full suite of Layer 2 managed Ethernet switching capabilities. The module is intended to be used on a carrier board to implement a complete Ethernet switching solution.

EPSM-12G2F

Specifications

Number of Ports 2 1G/2.5G SFP ports for fiber or copper connection
Implementation Magnetics and SFP sockets required on carrier board
On-board Memory 4Mb packet memory
Network Management SNMP v1/v2c/v3; Web GUI and command line interface (CLI)
Power Management ActiPHY and PerfectReach power management reduce power for shorter cable lengths and shut down power to disconnected ports
Serial Port 1 serial port for host interface; RS-232 transceiver required on carrier board
Indicator lights Serial data stream provided for 2 LEDs per port; decoder logic required on carrier board
Form Factor 55x84mm / 2.17x3.31” (Same as COM Express Type 10)
Interconnect Dual Samtec ERF5 series connectors, 120 pins each, 10mm board to board spacing
Input voltage 5VDC +/-5%
Power consumption 8.0W (24VDC input, 12 ports active)
Operating temperature -40 to +85°C with DSC-provided heat sink or heat spreader
Cooling Heat sink, 55x84mm, 16.6mm height
Heat spreader, 55x104mm, 7.6mm height
Weight 85G / 3.0 oz
Rohs Compliant

EPSM-10GX4

The EPSM-10GX is a managed Ethernet switch module in an ultra-compact 2.2" x 3.3" (55 x 84mm) size offering 24 10/100/1000Mbps copper ports + 2 10Gbps SFI ports. The core Ethernet switching technology is almost fully encapsulated on the module; for many applications, only the "last inch" of magnetics and I/O connectors is required to complete the circuit, enabling easy development of custom form factor compact, rugged Ethernet switch solutions.

EPSM-10GX4

Specifications

Number of Ports 24 10/100/1000Mbps Ethernet ports with non-blocking wire-speed performance
2 10G SFI ports for fiber or copper transceivers
Magnetics and 10G transceivers required on carrier board
Implementation 12 PHYs integrated on main board; QSGMII signals for additional 12-port PHY on carrier board
On-board Memory 4Mb packet memory
Network Management SNMP v1/v2c/v3; Web GUI and command line interface (CLI)
Power Management ActiPHY and PerfectReach power management reduce power for shorter cable lengths and shut down power to disconnected ports
Serial Port 1 serial port for host interface; RS-232 transceiver required on carrier board
Indicator lights Serial data stream provided for 2 LEDs per port; decoder logic required on carrier board
Form Factor 55x84mm / 2.17x3.31” (Same as COM Express Type 10)
Interconnect Dual Samtec ERF5 series connectors, 120 pins each, 10mm board to board spacing
Input voltage 5VDC +/-5%
Power consumption 20W max, all ports active
Operating temperature -40 to +85°C with DSC-provided heat sink or heat spreader
Cooling Heat sink, 55x84mm, 16.6mm height
Heat spreader, 55x104mm, 7.6mm height
Weight 85G / 3.0 oz
Rohs Compliant

EPS-24G4X

The EPS-24G4X is a managed Ethernet switch based on Diamond's EPSM-10GX4 switch module. The switch implements all features of the style='text-decoration: underline'>EPSM-10GX4 Ethernet switch module, including 24 10/100/1000Mbps copper ports and 4 10Gbps SFI ports accessed via SFP+ sockets. Depending on the ordering configuration, the switch contains embedded software supporting Layer 2 switching, Layer 3 routing/switching, and optional IEEE1588 PTP operation.

EPS-24G4X

Specifications

Number of Ports 24 10/100/1000Mbps Ethernet ports with non-blocking wire-speed performance 4 10G SFP+ ports
Power Management ActiPHY and PerfectReach power management reduce power for shorter cable lengths and shut down power to disconnected ports
Operating temperature -40 to +80°C
Weight 389g / 13.7oz
RohS Compliant
Implementation 2-board solution: EPSM-10GX4 switch module provides core switch function and 12 PHYs; additional 12 PHYs and remaining circuitry implemented on carrier board
On-board Memory 4MB packet memory
Network Management SNMP v1/v2c/v3; Web GUI and command line interface (CLI)
Serial Port 1 RS-232 port for host interface, 38400/N/8/1
Indicator lights LEDs for each port indicate link status and speed
Dimensions 107 x 156mm / 4.213 x 6.142"
Input voltage 7-40VDC
Power consumption Vin = 24VDC: 13W, all ports idle 20W, all 24 1G ports active 26W, all 24G ports and all 4 10G ports active

EPSM-10GX

The EPSM-10GX is a managed Layer 2+ Ethernet switch module in an ultra-compact 2.2" x 3.3" (55 x 84mm) size offering 24 10/100/1000Mbps copper ports + 2 10Gbps SFI ports. The module is intended to be used on a carrier board. The core Ethernet switching technology is almost fully encapsulated on the module; for many applications, only the "last inch" of magnetics and I/O connectors is required to complete the circuit, enabling easy development of custom form factor Ethernet switch solutions.

EPSM-10GX

Specifications

Ethernet Switch 24-port Layer 2/3 switch
Built-in 500MHz MIPS 24KEC microcontroller for configuration and management
Number of Ports 24 10/100/1000Mbps Ethernet ports with non-blocking wire-speed performance
On-board Memory 4Mb packet memory
Shared memory buffer with per-port & CoS memory management
MEF Hierarchical MEF compliant policing & scheduling; MEF E-Lane, E-Line, and E-Tree services
Frame buffer Jumbo frame support at all speeds
Network Management SNMP v1/v2c/v3
Web GUI
Command Line Interface (CLI)
VLAN IEEE 802.1Q VLAN switch with 32K MACs and 4K VLANs
Push/pop up to three VLAN tags
Independent & shared VLAN learning (IVL, SVL)
Multicast IPv4/IPv6 uni & multicast group support
Remarking Dual leaky bucket policers with remarking and statistic
Classifier 8 priorities and 8 CoS queues per port with strict or deficit-weighted round robin scheduling Shaping/policing per queue and per port
Storm Control Policing with storm control and MC/BC protection
Link Aggregation EEE 802.3ad
RSTP Rapid spanning tree protocol (IEEE 802.1W) and MTSP
MIBs Support for WebStax
Power Management ActiPHY and PerfectReach power management; VeriPHY cable diagnostics
Serial Port 1 RS-232 port for host interface
Indicator Lights 24 status LEDs, two per port; 2 general purpose
Standalone Cable Standalone network switch, or in combination with a host computer
General
Power Input 5VDC
Power Consumption 20W
Form Factor COM Express Mini, Type 10
Operating Temperature -40°C to +85°C (-40°F to +185°F)
Weight 85.2 grams (3.00 oz.)
MTBF TBD
RoHS Compliant

EPS-12000-CM

EPS-12000-CM is a managed Layer 2 or Layer 3 Ethernet switch module offering twelve 10/100/1000Mbps copper twisted pair ports in the ultra-compact COM Express Mini form factor. It is ideal for rugged applications including industrial, on-vehicle and military, where space is at a premium. The switch is based on Diamond's EPSM-10GX compact Ethernet switch module and uses a same-size carrier board to provide the power and magnetics circuitry to create a complete switch solution. This two-board design results in an ultra-compact size particularly suitable for UAVs and other unmanned vehicles.

EPS-12000-CM

Specifications

Managed Ethernet Switch
Switch Type 12 port Layer 2+ switch
Number of Ports 24 10/100/1000Mbps Ethernet ports with non-blocking wire-speed performance
On-board Memory 4Mb packet memory
Shared memory buffer with per-port & CoS memory management
MEF Hierarchical MEF compliant policing & scheduling; MEF E-Lane, E-Line, and E-Tree services
Frame buffer Jumbo frame support at all speeds
VLAN IEEE 802.1Q VLAN switch with 8K MACs and 4K VLANs
Push/pop up to two VLAN tags
Independent & shared VLAN learning (IVL, SVL)
Multicast IPv4/IPv6 multicast group support
Remarking Dual leaky bucket policers with remarking and statistic
Classifier 8 priorities and 8 CoS queues per port with strict or deficit-weighted round robin scheduling
Shaping/policing per queue and per port
Storm Control Policing with storm control and MC/BC protection
Link Aggregation EEE 802.3ad
Security Advanced security and prioritization available though multistage TCAM engine
RSTP Rapid Spanning Tree Protocol (IEEE 802.1W) and MSTP
MIBs Support for both WebStax and CEServices MIBs
Power Management ActiPHY and PerfectReach power management; VeriPHY cable diagnostics
Serial Port 1 RS-232 port for host interface
Standalone Cable Standalone network switch, or in combination with a host computer
General
Power Input 7 - 34VDC
Power Consumption 11W @12V i/p
Form Factor COM Express Mini: 84 x 55mm / 3.3 x 2.2”
Operating Temperature -40°C to +85°C (-40°F to +185°F)
MTBF TBD
RoHS Compliant

I/O Models

I/O Modules

Analog I/O Module

Diamond-MM-32DX-AT

DMM-32DX-AT is Diamond Systems’ most advanced embedded A/D board. It includes a comprehensive suite of analog and digital features to fit a wide variety of embedded application

Diamond-MM-32DX-AT

Specifications

Analog Inputs
Number of inputs 32 single-ended, 16 differential, or 16 SE + 8 DI; user selectable
A/D resolution 16 bits (1/65,536 of full scale)
Bipolar ranges ±10V, ±5V, ±2.5V, ±1.25V, ±0.625V
Unipolar ranges 0-10V, 0-5V, 0-2.5V, 0-1.25V, 0-.625V,
Input bias current 100pA max
Overvoltage protection ±35V on any analog input without damage
Input Impedance 10^13 ohms
Nonlinearity ±3LSB, no missing codes
Conversion rate 250,000 samples/sec.max
On-board FIFO 1024 16-bit samples
Calibration Automatic;values stored in EEPROM
Analog Outputs
Number of outputs 4
D/A resolution 16-bits (1/65536 of full scale) standard, 12-bits (1/4096 of full scale) optional
Output ranges ±5, ±10, 0-5, 0-10, ±2, 5V, programmable in I/O, 53mV steps
Output current ±5mA max per channel
Settling time 6µS max to 0.01%
Relative accuracy ±1 LSB
Nonlinearity ±1 LSB, monotonic
Reset Reset to zero-scale or mid-scale (jumper selectable)
Calibration Automatic; values stored in EEPROM
Waveform Buffer 1,024 samples, cyclical
Digital I/O
Main I/O 24 programmable I/O
Input current ±1µA max
Output current
Logic 0 64mA max per line
Logic 1 -15mA max per line
Auxilary I/O 4 inputs, 4 outputs, optional use as trigger/control lines
Counter/Timers
A/D Pacer clock 32-bit down counter (2 82C54 counters cascaded)
Clock source 10MHz on-board clock or external signal
General purpose 16-bit down counter (1 82C54 counter)
General
Power supply +5VD±10%@410mA typ
Operating temperature -40°C to +85°C
Weight 3.4oz/96g
MTBF 972,275 hours at +20°C
RoHS Compliant

DIAMOND-MM-16R-AT

The DMM-16R-AT features top performance and flexibility for a mid-range price. It has 16 single-ended / 8 differential analog voltage inputs with both unipolar and bipolar input ranges, programmable gain, and a maximum sampling rate of 100KHz. The 4 D/A channels and 16 digital I/O lines provide additional real-world control and monitoring capability.

DIAMOND-MM-16R-AT

Specifications

Analog Inputs
Number of inputs 8 differential or 16 single-ended (user selectable)
A/D resolution 16 bits (1/65,536 of full scale)
Bipolar ranges ±10V, ±5V, ±2.5V, ±1.25V, ±0.625V
Unipolar ranges 0-10V, 0-5V, 0-2.5V, 0-1.25V
Input bias current current 3nA max
Overvoltage protection ±35V on any analog input without damage
Input Impedance 10^13 ohms
Nonlinearity ±3LSB, no missing codes
Conversion rate 100,000 samples/sec. max with interrupts
Conversion trigger Software trigger, internal pacer clock, or external TTL signal
Input FIFO 512 samples,256-sample interupt threshold
A/D interrupt End of A/D conversion
End of A/D scan
FIFO half-full
Calibration A/D and D/A circuits calibrated under software control using on-board precision references and EEPROM storage
Analog Outputs
Number of outputs 4
D/A resolution 12 bits (1/4096 of full scale)
Output ranges Fixed: ±5, 0-5V
Programmable: Anywhere between 0V and 10V in 1mV increments
Reset: All channels reset to mid-scale (0V for bipolar ranges)
Output current ±5mA max per channel
Settling time 6µS max to 0.01%
Relative accuracy ±1 LSB
Nonlinearity ±1 LSB, monotonic
Digital I/O
Number of lines 16, organized as 2 8-bit ports
Logic Levels 3.3V / 5V jumper selectable
Termination 10K ohm pull-up / pull-down resistors, jumper selectable
Input voltage Vlogic = 5V
Logic 0 1.65V max
Logic 1 3.35V min
Output voltage Vlogic = 5V
Logic 0 0.44V max, Iout = 24mA
Logic 1 3.76V min, Iout = -24mA
Input voltage Vlogic = 3.3V
Logic 0 0.80V max
Logic 1 2.00V min
Output voltage Vlogic = 3.3V
Logic 0 0.44V max, Iout = 24mA
Logic 1 2.25V min, Iout = -24mA
Counter/Timers
A/D Timer clock 32-bit down counter
General purpose 16-bit down counter
Clock source 10MHz on-board clock or external signal
General
Bus Interface ISA (5V) bus
Power supply +5V ±5% @ 390mA typical
Operating temperature -40°C to +85°C tested and guaranteed
Weight 64g / 2.25oz
RoHS Compliant

DIAMOND-MM-16RP-AT

The DMM-16R-AT features top performance and flexibility for a mid-range price. It has 16 single-ended / 8 differential analog voltage inputs with both unipolar and bipolar input ranges, programmable gain, and a maximum sampling rate of 100KHz. The 4 D/A channels and 16 digital I/O lines provide additional real-world control and monitoring capability.

DIAMOND-MM-16RP-AT

Specifications

Analog Inputs
Number of outputs 8 differential or 16 single-ended (user selectable)
A/D resolution 16 bits (1/65,536 of full scale)
Bipolar ranges ±10V, ±5V, ±2.5V, ±1.25V, ±0.625V
Unipolar ranges 0-10V, 0-5V, 0-2.5V, 0-1.25V
Input bias current 3nA max
Overvoltage protection ±35V on any analog input without damage
Input Impedance 10^13 ohms
Nonlinearity ±3LSB, no missing codes
Conversion rate 100,000 samples/sec. max with interrupts
Conversion trigger Software trigger, internal pacer clock, or external TTL signal
Input FIFO 512 samples, 256-sample interrupt threshold
A/D interrupt End of A/D conversion
End of A/D scan
FIFO half-full
Calibration A/D and D/A circuits calibrated under software control using on-board precision references and EEPROM storage
Analog Outputs
Number of outputs 4
D/A resolution 12 bits (1/4096 of full scale)
Output ranges Fixed: ±5, 0-5V
Programmable: Anywhere between 0V and 10V in 1mV increments
Reset: All channels reset to mid-scale (0V for bipolar ranges)
Output current ±5mA max per channel
Settling time 6µS max to 0.01%
Relative accuracy ±1 LSB
Nonlinearity
±1 LSB, monotonic
Digital I/O
Number of lines 16, organized as 2 8-bit ports
Logic Levels 3.3V / 5V jumper selectable
Termination 10K ohm pull-up / pull-down resistors, jumper selectable
Input voltage Vlogic = 5V
Logic 0 1.65V max
Logic 1 3.35V min
Output voltage Vlogic = 5V
Logic 0 0.44V max, Iout = 24mA
Logic 1 3.76V min, Iout = -24mA
Input voltage Vlogic = 3.3V
Logic 0 0.80V max
Logic 1 2.00V min
Output voltage Vlogic = 3.3V
Logic 0 0.44V max, Iout = 24mA
Logic 1 2.25V min, Iout = -24mA
Counter/Timers
A/D Timer clock 32-bit down counter
General purpose 16-bit down counter
Clock source 10MHz on-board clock or external signal
General
Bus Interface Dual PCI (3.3V) and ISA (5V) buses supported; Autoselects for PCI bus; manual override option
Power supply +5V ±5% @ 375mA typical
±15V output current ±10mA max with DACs unloaded
Operating temperature -40°C to +85°C tested and guaranteed
Weight 80g / 2.84oz
RoHS Compliant

Diamond-MM-AT

The new Diamond-MM-AT analog I/O module offers autocalibration, programmable gain, A/D FIFO, and extended temperature operation to mid-range 12-bit analog I/O users. All these features are added on top of our existing Diamond-MM architecture at the same price as the original board, to bring you an unbeatable combination of features at this price level.

Diamond-MM-AT

Specifications

Input Impedance

Analog Inputs
Number of outputs 8 differential or 16 single-ended (user selectable)
A/D resolution 12 bits (1/4096 of full scale)
Bipolar ranges ±10V, ±5V, ±2.5V, ±1.25V, ±0.625V
Unipolar ranges 0-10V, 0-5V, 0-2.5V, 0-1.25V
Input bias current 3nA max
Max. input voltage ±10V for linear operation
Overvoltage protection ±35V on any analog input
10^13 ohms
Conversion rate 100,000 samples per second with interrupts
Input FIFO 512 samples, interrupt on half-full
Analog Outputs
Number of outputs 2
D/A resolution 12 bits (1/4096 of full scale)
Output ranges Fixed: ±5V, 0-5V
Programmable: anywhere between 0V and 10V in 1mV increments
Output current ±5mA max per channel
Settling time 4µS max to ±2/2 LSB
Relative accuracy ±1 LSB
Nonlinearity ±1 LSB, monotonic
Reset All channels reset to OV
Digital I/O
Number of inputs 8, HCT/TTL compatible
Input voltage
Logic 0: 0.0V min, 0.8V max
Logic 1: 2.0V min, 5.0V max
Input current ±1µA max
Number of outputs 8, HCT/TTL compatible
Output voltage
Logic 0: 0.0V min, 0.33V max
Logic 1: 3.8V min, 5.0 max
Output current
Logic 0: 64mA max per line
Logic 1: -15mA max per line
Counter/Timers
A/D Pacer clock 32-bit down counter (2 82C54 counters cascaded)
Clock source 10MHz on-board source or external signal
General purpose 16-bit down counter (1 82C54 counter)
Interrupt trigger End of A/D conversion or scan
General
Calibration A/D and D/A circuits calibrated under software control
Power supply +5VD±10%@350mA typical
±15V output current ±10mA max with DACs unloaded
Operating temperature -40°C to +85°C Extended
Weight 3.3oz/93
RoHS Compliant

Diamond-MM

Diamond-MM has all the primary features you expect in a high-performance analog I/O board at a reduced price. The analog input circuit uses a 12-bit A/D converte and can be configured for single-ended or differential input wiring, as well as unipolar or bipolar input ranges. It also offers 10 different input ranges, so it can work with a wide variety of input signals. The maximum A/D conversion rate is approximately 2,000-20,000 per second using interrupts (depending on the operating system) or 100,000 per second using DMA.

Diamond-MM

Specifications

Analog Inputs
Number of inputs 8 differential or 16 single-ended (user selectable)
A/D resolution 12 bits (1/4096 of full scale)
Bipolar ranges ±10V, ±5V, ±2.5V, ±1V, ±0.5V, Custom
Unipolar ranges 0-10V, 0-5V, 0-2.5V, 0-1V, 0-.5V, Custom
Input bias current 50nA max
Max. input voltage ±10V for linear operation
Overvoltage protection ±35V on any analog input
Input Impedance 10^13 ohms
Conversion trigger software trigger, internal pacer clock, or external TTL signal
Analog Outputs
Number of outputs 2
D/A resolution 12 bits (1/4096 of full scale)
Output ranges 0-5V, adjustable, or external reference input
Output current ±8mA max per channel
Settling time 4µS max to ±2/2 LSB
Relative accuracy ±1 LSB
Nonlinearity ±1 LSB, monotonic
Reset All channels reset to OV
Digital I/O
Number of inputs 8, HCT/TTL compatible
Input voltage
Logic 0: 0.0V min, 0.85 max
Logic 1: 2.0V min, 5.0V max
Input current ±1µA max
Number of outputs 8, HCT/TTL compatible
Output voltage
Logic 0: 0.0V min, 0.33 max
Logic 1: 3.8V min, 5.0 max
Output current ±4mA max per line
Counter/Timers
A/D Pacer clock 32-bit down counter (2 82C54 counters cascaded)
Clock source 10MHz on-board source or external signal
General purpose 16-bit down counter (1 82C54 counter)
Interrupt/DMA trigger End of A/D conversion
General
Power supply +5VD±10%@165mA typical
±15V output current ±10mA max with DACs unloaded
Operating temperature 0°C to +70°C Standard, -40°C to +85°C Extended
Weight 3.3oz/93g
MTBF DMM-XT 372,809 hours
RoHS Compliant

Ruby-MM-1616A

The Ruby-MM-1616 PC/104 module provides up to 16 channels of 16-bit resolution analog voltage or current output. The output range can be individually selected for 0-5V, 0-10V, ±5V, ±10V, 0-20mA, 4-20mA, or 0-24mA. All outputs are updated simultaneously, either with a software command or in response to an external signal. A waveform generator is available on up to 16 channels with simultaneous updating of all channels.

Ruby-MM-1616A

Specifications

Analog Outputs
Number of outputs 4, 8, or 16
Resolution 16-bits
Output ranges 0-5V, 0-10V unipolar, ±5V, ±10V bipolar
0-20mA, 4-20mA, 0-24mA
Settline time 10us maximum to ±.003%
Linearity error ±2 LSB maximum
Differential nonlinearity ±2 LSB maximum
Monotonicity 15 bits minimum
Maximum output current ±5mA/2KO minimum load
Reset All DACs reset to 0V
Calibration Digital with internal scale and offset registers for each channel
Waveform generator Up to 16 channels
Digital I/O
Number of lines 40 byte-wide, 8 bit-wide, programmable direction
CMOS/TTL compatible (82C55)
Input voltage Logic 0: -0.5V min, 0.8V max
Logic 1: 2.0V min, 5.5V max
Output voltage ±Logic 0: 0.0V min, 0.4V max
Logic 1: 3.0V min, 4.6V max
Output current ±2.5mA maximum per line
Pull-up resistor 10KO on each I/O lines
External trigger TTL/CMOS compatible, 10KO pull-up resistor, active high edge
Reset All digital I/O lines are set to input and all data registers are set to 0
Counter/timers 2 32-bit programmable; 40MHz clock
Pulse width modulators 4 24-bit
General
Input Power +5VDC ±10%
Operating temperature -40°C to +85°C Extended
Dimensions 90mm x 96mm (3.55" x 3.775")
Form Factor PC/104 compliant
Weight 3.0oz (85g)
MTBF 100,000 hours
RoHS Compliant

Digital I/O Module

GPIO-MM

GPIO-MM is a PC/104 digital I/O module based on an FPGA, allowing multiple feature sets to be implemented on the same hardware platform. The FPGA is a Xilinx Spartan 2 RAM-based device with 200K gates (XC2S200). An on-board configuraton flash memory device stores the FPGA code for automatic loading on power-up, and new code can be downloaded using a JTAG cable connected to a PC. Several standard off the shelf personalities are available, and custom ones can be developed either by users with Xilinx tools or by Diamond as a customization service.

GPIO-MM

Specifications

Base FPGA Xilinx Spartan II, 200,000 gates, 40K RAM bits
Input clock 40MHz
FPGA code storage Flash memory, field upgradeable via JTAG
ID indicator 8-bit LED display indicates FPGA code personality
No. of I/O pins 100 pins (48 buffered)
Programmable Digital I/O 48 using 8255 cores
Fixed Direction I/O 8 fixed inputs and 8 fixed outputs
Counter/timers 10 16-bit, using 9513 cores
Max counting freq 40MHz
Counter modes Counter, rate/square-wave generator, programmable one-shot, hardware/software triggered strobe
Output current, buffered I/O Logic 0: 64mA max per line
Ouptut current,fixed I/O and fixed counter/timers ±24mA max
Dimensions 3.55" x 3.775", PC/104 form factor
PC/104 bus 16-bit stackthrough ISA bus
Power supply +5VDC ±5%
Operating temperature -40°C to +85°C standard, all versions
RoHS Compliant

GPIO-MM-12

GPIO-MM-12 is part of a family of reconfigurable digital I/O and counter / timer modules with various port and pin configurations. Each board uses identical hardware with a 200K gate Xilinx Spartan II RAM-based FPGA. The varying configurations are based on different FPGA code. The FPGA code is stored in a flash memory on the board, enabling GPIO-MM-12 to be reprogrammed in the field with different designs, including custom designs.

GPIO-MM-12

Specifications

Base FPGA Xilinx Spartan II, 200,000 gates, 40K RAM bits
Input clock 40MHz
FPGA code storage Flash memory, field upgradeable via JTAG
No. of I/O pins 100 pins (48 buffered)
Programmable Digital I/O 48 using 8255 cores
Fixed Direction I/O 8 fixed inputs and 8 fixed outputs
Counter/timers 10 16-bit, using 9513 cores
Max counting freq 40MHz
Counter modes Counter, rate/square-wave generator, pulse-width modulator, programmable one-shot, hardware/software triggered strobe
Output current, buffered I/O Logic 0: 64mA max per line
Ouptut current, fixed I/O and fixed counter/timers ±24mA max
Dimensions 3.55" x 3.775", PC/104 form factor
PC/104 bus 16-bit stackthrough ISA bus
Power supply +5VDC ±5%
Operating temperature -40°C to +85°C standard, all versions
RoHS Compliant

GPIO-MM-21

GPIO-MM-21 is part of a family of reconfigurable digital I/O and counter / timer modules with various port and pin configurations. Each board uses identical hardware with a 200K gate Xilinx Spartan II RAM-based FPGA. The varying configurations are based on different FPGA code. The FPGA code is stored in a flash memory on the board, enabling GPIO-MM-21 to be reprogrammed in the field with different designs, including custom designs.

GPIO-MM-21

Specifications

Base FPGA Xilinx Spartan II, 200,000 gates, 40K RAM bits
Input clock 40MHz
FPGA code storage Flash memory, field upgradeable via JTAG
ID indicator 8-bit LED display indicates FPGA code personality
No. of I/O pins 100 pins (48 buffered)
Programmable Digital I/O 96 using 8255 cores
Output current, buffered I/O Logic 0: 64mA max per line
Dimensions 3.55" x 3.775", PC/104 form factor
PC/104 bus 16-bit stackthrough ISA bus
Power supply +5VDC ±5%
Operating temperature -40°C to +85°C standard, all versions
RoHS Compliant

Onyx-MM

Extensive software control of features is the highlight of this digital I/O module featuring 48 digital I/O lines, 3 16-bit counter/timers, and 3 independent PC bus interrupt inputs.

The 48 digital I/O lines on Onyx-MM are based on 2 82C55 ICs. They can be programmed for input or output in groups of 8 lines. Direct as well as strobed (latched) I/O modes are supported, and all I/O lines are connected to 10K Ohm pull-up resistors.

Onyx-MM

Specifications

Counter/Timers
Chip 82C54-2
Counter/timers 3, 16 bits wide
Maximum input freq. 10MHz
On-board osc. 4MHz ±.01%
Signal type TTL
Input voltage
Low: -0.5V min, 0.8V max
High: 2.0V min, 5.5V max
Input current -200µA max (low), 2µA max (high)
Output voltage
Low: 0.0V min, 0.4V max
High: 3.0V min, Vcc -0.4V max
Output current ±2.5mA max, each line
Pullup resistors 10KO all input lines
Digital I/O
Chip 82C55A (qty. 2)
Number of I/O lines 48, TTL/CMOS Compatible
Direction All lines programmable for input in groups of 4 and 8
Output current ±2.5mA max, each line
Pullup resistors 10KO all input lines
Interrupts
Number of interrupts 3
Pull-down resistor 1KO resistor selectable via jumper on each interrupt
Interrupt level 2 - 7
Interrupt sources Counter/timer outputs, Interrupt input, or DIO lines CO (programmable)
General
Power supply +5V ±10% @ 120mA typical all outputs open
Temperature -40° to +85°C extended
PC/104 Bus 8 bits
Weight 2.8 oz/79g
RoHS Compliant

Onyx-MM-DIO

This module is the same as our Onyx-MM digital & counter/timer module but without the counter/timer and interrupt circuitry. This board still has the quality and attention to detail of our other modules, such as: 10K Ohm pull-up resistors on all I/O lines; all ports reset to 0 on power-up or system reset; connector pinouts compatible with our other digital I/O boards; and free software.

The 48 digital I/O lines on Onyx-MM-DIO are based on 2 82C55 ICs. They can be programmed for input or output in groups of 8 lines. Direct as well as strobed (latched) I/O modes are supported, and all I/O lines are connected to 10K Ohm pull-up resistors.

Onyx-MM-DIO

Specifications

Digital I/O
Chip 82C55A (qty. 2)
Number of I/O lines 48
Direction Programmable in groups of 4 or 8
Input voltage
Low: -0.5V min, 0.8V max
High: 2.0V min, 5.5V max
Output voltage
Low: 0.0V min, 0.4V max
High: 3.0V min, Vcc -0.4V max
Output current ±2.5mA max, each line
Pullup resistors 10KO all input lines
General
Power supply +5V ±10% @ 120mA typical all outputs open
Temperature -40°C to +85°C
PC/104 Bus 8 bits
Weight 2.3 oz/65g
MTBF OMM-DIO-XT 1,714,901 hours
RoHS Compliant

Opal-MM-1616 Opto In + Relay Out Module

pal-MM-1616 is a PC/104 format digital I/O module designed for industrial applications requiring isolation between the computer and the external signals it is monitoring and controlling.

Opal-MM-1616 Opto In + Relay Out Module

Specifications

Optoisolated Inputs
Number of inputs 16 unidirectional optoisolated inputs
Input capacity 30VDC with current limiting resistors
Input impedance 8k ohms
Logic levels Logic 0: 0 - 1.5VDC
Logic 1: 3 - 30VDC
Programmability Programmable edge detection with interrupts
Relay Outputs
Number of outputs 16 relay outputs
Relay contacts SPDT (Form C) contacts
Break before make
Current capacity 2A
Switching capacity 30VDC at 2A
125VAC at 0.1A resistive
Maximum switching capacity 30W (DC)
Contact resistance 50mohm max
Actuation time Operate: 5ms maximum
Release: 5ms maximum
Relay lifetime 10,000,000 operations
Relay Outputs
Number of outputs 16 relay outputs
Relay contacts SPDT (Form C) contacts
Break before make
Current capacity 2A
Switching capacity 30VDC at 2A
125VAC at 0.1A resistive
Maximum switching capacity 30W (DC)
Contact resistance 50mohm max
Actuation time Operate: 5ms maximum
Release: 5ms maximum
Relay lifetime 10,000,000 operations
General
I/O header Optoisolated inputs: 1 34-pin (2 x 17) header on .1" connector
Relay outputs: 2 26-pin (2 x 13) headers on .1" connecters
Mating Cables: C-34-18 for optoisolated inputs
C-26-18 for relay outputs (quantity 2)
Isolation (all I/O) 500VDC or AC, input to board or board to output
Channel to channel isolation
Power supply +5VDC ±10%
Current consumption 70mA typical, all relays off; additional 28mA per activated relay
Bus interface PC/104 (ISA) bus
Form factor PC/104 (3.55" x 3.775")
Operating temperature -40°C to +85°C (-40°F to +185°F)
Weight 3.4oz (96g)
Universal Driver support
RoHS Compliant

Pearl-MM Relay Output Module

Pearl-MM is a PC/104 format industrial control module with 16 relays. The relays have PDT (form C) configuration. Each relay has 3 contacts: Common, Normally Open, and Normally Closed. For safety and reliability, all relays are in their power-off state (Common connected to Normally Closed) at power-up or system reset. The relays can switch both AC and DC voltages. They feature long life (100,000,000 operations), quick actuation time (4ms max operate and release), and isolation (500V AC or DC).

Pearl-MM Relay Output Module

Specifications

Relays
No. of Outputs 16
Relay type SPDT (Form C)
Max voltage/current DC: 0VDC/2A 60W (DC), 60VA (AC)
AC: 125VAC/0.5A resistive
Max switching capacity 220VDC, 250VAC
Max operating voltage 10mA@10mVDC
Contact resistance 100mO max
Relay lifetime 100,000,000 operations
Actuation time 4ms max operate or release
General
I/O connections 50-position (2x20) .025” square pin header on .1” centers
Isolation (all I/O) 500VDC or AC, channel-to-channel and channel-to-board
Power supply +5VDC ±10%
Operating temperature -40°C to +85°C
Operating humidity 5% to 95% non-condensing
Weight 3.4oz / 96g
MTBF 118,227 hours
RoHS Compliant

IR104-PBF Opto In & Relay Out Module

IR104-PBF is a high-density PC/104 format digital I/O module designed for industrial applications requiring isolation between the computer and the external signals it is monitoring and controlling. This module features 20 optoisolated digital inputs and 20 relay outputs. Each input can accept both AC and DC voltages as low as 3V and as high as 24V.

IR104-PBF Opto In & Relay Out Module

Specifications

Inputs 20 Optoisolated inputs
Input voltage 3-24V AD or AC
Input impedance 2.8KO
Outputs 20 SPST relays
Max voltage 150VDC, 250 VAC
Max current 5A AC or DC (30VDC max)
Max power 150W, 1250VA
Contact resistance 30mO initially
UL rating 5A/30VDC or 250VAC 1/10HP 120VAC
Lifetime 20,000,000 cycles mechanical 100,000 cycles @ full power
Actuation time 6ms operate, 3ms release
I/O connectors
Inputs: 2x20 pin header, .1" spacing
Outputs: Dual 1x20 detachable screw terminals
Power 5V @ 110mA typ (all relays off)
Operating Temp -25°C to +70°C
Size 3.550" x 3.775"
0.492" max component height
Weight 3.2 oz/90g
MTBF 57,450 hours
RoHS Compliant

P104-GPIO96

P104-GPIO96 is a programmable PCI-104 DIO module using a high-capacity (700K gate equivalent) PCI Express FPGA for maximum density and flexibility. The base hardware configuration features 96 digital I/O lines grouped into 12 8-bit ports. All ports have I/O buffers to protect the FPGA and feature 5V logic drive levels. The ports are organized into a combination of byte-wide, nibble-wide, and bit-wide direction control for maximum flexibility and application compatibility.

P104-GPIO96

Specifications

Base FPGA LatticeECP3, 700K gate equivalents
Input clock 50MHz
FPGA code storage Flash memory, field upgradeable via JTAG
Total I/O lines 96
Primary I/O 48 lines with 3 8-bit and 2 4-bit; configurable pull-up/down resistors
Secondary I/O 48 lines with 6 8-bit buffers; configurable pull-up/down resistors
Counter/timers 8 32-bit up/down counters (alternate mode)
Max counting frequency (coming soon)
Counter modes Counter, rate/square-wave generator, pulse-width modulator, programmable one-shot, hardware/software triggered strobe
Output current Ports A, B & D: 24mA per pin max; 200mA per port max
Port C low: 24mA per pin max
Port C high: -24mA per pin max
Ports E & F: 32mA per pin max
Input current +/-340uA max
Form Factor PC/104-Plus
Expansion PC/104-Plus (ISA + PCI) stackable expansion
Dimensions 3.55 x 3.775 in. (90 x 96 mm)
Power supply 3.3VDC ±5%
Operating temperature -40°C to +85°C standard
Weight 3.4oz (96g)
RoHS Compliant

DS-MPE-GPIO

The DS-MPE-GPIO is a rugged, low cost 36-channel digital I/O PCIe MiniCard module that is ideal for digital I/O expansion in embedded and OEM applications.

An FPGA provides 36 buffered digital I/O lines that can be configured to operate in simple I/O mode in the form of 8-bit and 4-bit ports, or in counter/timer and pulse width modulator modes. Two ports are fixed digital I/O ports with programmable direction in 8-bit groups. One port can operate as either a 4-bit DIO or 4 counter/timers with 1 input and 1 output per counter. One port can operate as either 8 DIO or up to 8 pulse width modulators.

DS-MPE-GPIO

Specifications

Number of DIO 36
Pull-up / Pull-down Software configurable
Transceivers 3245 with high current output
Power-up / Reset DIO in input mode
Pulse Width Modulators Up to 4 24-bit circuits configurable
0-100% duty cycle
On/off control
Programmable polarity
Counter / Timers 4 32-bit circuits configurable Programmable
Input power +3.3VDC +/-5%
Power consumption 100mA @ 3.3V
Software drivers Windows 7, XP, CE
Linux 2.6.16, 2.6.27, 2.6.31, 2.6.32
Universal Driver Support for all functions
Form Factor PCIe MiniCard full size
Dimensions 50.95 x 30mm (2 x 1.18")
Operating temperature -40ºC to +85ºC
Operating humidity 5% to 95% noncondensing
MTBF tbd
Weight 8.5g (0.3oz)
RoHS Compliant

PCIe MiniCard Carrier

The PCIe MiniCard carrier offers four PCIe MiniCard sockets on a compact PCI/104 Express form factor board. All four sockets have PCIe x 1 and USB interfaces and support full size and half size PCIe MiniCard modules.

The module provides full support to all sockets while consuming only a single lane of host SBC resources. SIM card support is provided for two sockets.

PCIe MiniCard Carrier

Specifications

Number of PCIe MiniCard sockets 4
Card Size Full and half size cards supported
SIM support 2 sockets support SIM cards
Interfaces PCIe x1 and USB
Host interface PCI-104 pass through
LEDs LEDs provided for all 4 sockets
Form FactorDimensions PCI/104-Express form factor with wings: 4.5" x 3.775" (114mm x 96mm)
Power supply +5VDC ±5%
Operating temperature -40°C to +85°C (-40°F to +185°F)
Operating humidity 5% to 95% non-condensing
Shock MIL-STD-202G compatible
Vibration MIL-STD202G compatible
MTBF tbd hours at 20°C
Weight 2.5oz (71g)
RoHS Compliant

Serial I/O Module

Emerald-MM-8PL-XT

Emerald-MM-8PL offers 8 multi-protocol serial ports on a single PC/104 module with complete software configurability via the operating system. Each port can be individually selected for RS-232, RS-422, or RS-485 under software control. Both local-echo and non-local-echo modes are supported for RS-485. I/O addresses and interrupt levels are also programmable, with interrupt sharing available for any number of ports. Each port may further be enabled or disabled in software. All configuration data is stored in an on-board EEPROM that is loaded automatically on power-up.

Emerald-MM-8PL-XT

Specifications

Serial Ports
Number of serial ports 8
Protocols RS-232, RS-422, RS-485 (local and no echo)
Configuration All features software configurable
Maximum baud rate 460.8kbps
Communications parameters 5, 6, 7, or 8 data bits; Even, odd, or no parity
Short circuit protection Continuous, all outputs
RS-232 mode
Input Impedance 3KO min
Input voltage swing ±30V maximum
Output voltage swing ±5V min, ±7V typical
RS-422/RS-485 modes:
Differential input threshold -0.2V min, +0.2V max
Input impedance 12KO minimum
Input current +1.0mA max (Vin = 12V)
-0.8mA max (Vin = -7V)
Differential output voltage 2.0V min (RL=50O)
High/low states differentia output voltage symmetry 0.2V max
Digital I/O
Number of I/O lines 8 in, 8 out
Input voltage Low: -0.3V min, 0.8V max
Output voltage Low: 0.0V min, 0.4V max (IOL = 6mA max)
General
I/O header 2 40-position (2x10) .025" square pin header on .1" centers;
Headers mate with standard ribbon cable (IDC) connectors
Dimensions 3.55" x 3.775"
Power supply +5VDC ±10%
Current consumption 160mA typical, all outputs unloaded
Operating temperature -40°C to +85°C standard, all versions
MTBF EMM-8P-XT: 490,502 hours
RoHS Compliant

Emerald-MM-4M 4-Port

Our Emerald-MM PC/104 module gives you 4 serial ports operating at speeds up to 115kbps.

In RS-232 mode, the full complement of standard PC serial port signals (8 signals + ground) are provided for each port and are grouped onto two 20-pin headers (2 ports per header). In RS-422 mode, Signals RX+, RX-, TX+, and TX- are provided, along with ground. In RS-485 mode, signals TX+/RX+ and TX-/RX- are provided, along with ground.

Emerald-MM-4M 4-Port

Specifications

Serial Ports
Number of serial ports 4
Protocol RS-232, RS-422, RS-485 (jumper selected)
Maximum baud rate 115kbps standard version
460.8kbps available (EMM-HS-XT)
Communications parameters 5, 6, 7, or 8 data bits
Even, odd, or no parity
Short circuit protection All outputs protected against continuous short circuit
RS-232 mode:
Input impedance 3KO minimum
Input voltage swing ±30V maximum
Output voltage swing ±5V min, ±7V typical
RS-422, RS-485 modes:
Differential -0.2V min, +0.2V max input threshold
Input impedance 12KO minimum
Input current +1.0µA max (VIN = 12V)
-0.8µA max (VIN = -7V)
Differential output voltage 2.0V min (RL=50O)
High/low states differential output voltage symmetry 0.2V maximum
General
I/O header 2 20-position (2x10) .025" square pin header on .1" center;
Headers mate with standard ribbon cable (IDC) connectors
Dimensions 3.55" x 3.775"
Power supply +5VDC ±10%
Current consumption 80mA typical, all outputs unloaded
Operating temperature -40°C to +85°C Extended
Operating humidity 5% to 95% noncondensing
PC/104 bus 8-bit and 16-bit bus headers are installed
Weight 2.6oz/74g
MTBF EMM-4M-XT 555,428 hours
RoHS Compliant

Emerald-MM-Opto 4-Port Opto

Emerald-MM-Opto provides an integrated, rugged, and reliable solution for PC/104-expandable embedded systems requiring serial communications in demanding applications. It offers 2 or 4 optically isolated serial ports with RS-232, RS-422, and RS-485 protocols, as well as 24 digital I/O lines, all on a single board.

Emerald-MM-Opto 4-Port Opto

Specifications

Serial Ports 2 or 4, RS-232/422/485
Data Rates RS-232, 230.4kbps max
RS-422/485: 460.8kbps max
Signals RS-232: RXD, TXD, RTS, CTS
RS-422/485: RXD, TXD
Addresses 8 preconfigured standard I/O address options; custom addresses available
Interrupts IRQ levels 2, 3, 4, 5, 6, 7, 10, 12, 15;
Interrupt sharing supported
Isolation 1000V AC or DC, port to port or port to system
Termination 150? with 1K? pull-up/pull-down
UART 16C2850 with 128-byte FIFO and auto-flow control
Digital I/O 24 programmable direction using 82C55
DIO termination 10K? pull-up
Connectors Individual 10-pin connector for each serial port; 26-pin connector for digital I/O
Bus PC/104 16-bit bus (8-bit data)
Power +5VDC @ 300mA typical, all outputs open
Operating Temperature -40ºC to +85ºC
Dimensions 3.550"W x 3.775"H
RoHS Compliant

Emerald-MM-8PLUS 8-Port

Emerald-MM-8Plus is a high performance multi-protocol serial communications board offering eight ports on a single PC/104-Plus module. Supporting baud rates up to 921.6K bps in RS-232 mode or 1.8432Mbps in RS422 or RS485 mode, each port can be individually selected for RS-232, RS-422, RS-485 or TTL level operation. Both local-echo and non-local-echo modes are supported for RS-485. Protocol selection is achieved via a jumper block for each of the eight ports. Line termination for RS-422/485 modes is also jumper-selectable.

Emerald-MM-Opto 4-Port Opto

Specifications

Serial Ports
Number of serial ports 8
Protocols RS-232, RS-422, RS-485 (local and no echo)
Protocol Configuration Jumpers
Software Configuration Plug and Play
Maximum baud rate 1.8432Mbps
Communications parameters 5, 6, 7, or 8 data bits; Even, odd, or no parity
Short circuit protection Continuous, all outputs
RS-232 mode
Input Impedance 3KO min
Input voltage swing ±30V maximum
Output voltage swing ±5V min, ±7V typical
RS-422/RS-485 modes:
Differential input threshold -0.2V min, +0.2V max
Input impedance 12KO minimum
Input current +1.0mA max (Vin = 12V)
-0.8mA max (Vin = -7V)
Differential output voltage 2.0V min (RL=50O)
High/low states differentia output voltage symmetry 0.2V max
Digital I/O
Number of I/O lines 8 individually programmable
Input voltage Logic 0: -0.3V min, 0.8V max
Logic 1: 2.0V min, 5.3V max
Output voltage 0: 6mA max
1: -4mA max
General
I/O header 2 40-position (2x20) .025" square pin header on .1" centers;
Headers mate with standard ribbon cable (IDC) connectors
Dimensions 3.55" x 3.775"
Power supply +5VDC ±10%
Current consumption 160mA typical, all outputs unloaded
Operating temperature -40°C to +85°C standard, all versions
Weight 3.1oz (87.9g)
RoHS Compliant

Emerald-MM-8EL 4- or 8-Port

The Emerald-MM-8EL-XT is a family of high performance PCIe/104 "OneBank" serial I/O modules offering 4 or 8 multiprotocol serial ports with software-controlled configuration and optional opto-isolation.

Emerald-MM-8EL 4- or 8-Port

Specifications

Serial Ports
Number of serial ports 4 or 8
Protocols RS-232, RS-422, RS-485 configured with software, no jumpers
Maximum baud rate RS-232 mode: 1Mbps
RS-422/485 mode: 10Mbps
UART 16550 compatible octal UART with 256-byte TX/RX FIFOs
Transceivers SP330 multiprotocol transceivers, one per port
Communications parameters 5, 6, 7, or 8 data bits; Even, odd, or no parity
Termination Software programmable RS-422/485 termination
Isolation Independent 2500VRMS isolation port-by-port
ESD protection +/-15KV on each port
Short circuit protection Continuous, all outputs
RS-232 mode
Input Impedance 3KO min
Input voltage swing ±30V maximum
Output voltage swing ±5V min, ±7V typical
RS-422/485 modes
Differential input threshold -0.2V min, +0.2V max
Input impedance 12KO minimum
Input current +1.0mA max (Vin = 12V)
-0.8mA max (Vin = -7V)
Differential output voltage 2.0V min (RL=50O)
High/low states differential output voltage symmetry 0.2V max
Digital / Analog I/O
Number of lines 8 individually programmable lines:
8 as digital input or output
7 as 12-bit analog input
Analog input ranges 0-2.048V or 0-3.3V
General
Host interface PCIex1 using PCIe/104 OneBank connector
Inrush current Staggered turn-on of isolated devices for reduced inrush current at power on
On-board microcontroller On-board PIC microcontroller with flash to manage and store configurations
Connectors Latching connectors on all ports for increased ruggedness
Dimensions 3.55" x 3.775" (90mm x 96mm)
Conforms to PCIe/104 OneBank form factor supporting Type 1 and Type 2
Power supply +5VDC ±5%
Current consumption 160mA typical, all outputs unloaded
Software drivers Windows Embedded Standard 7, XP, 2000 and Vista
Linux 2.6.16, 2.6.31 and 2.6.32
Operating temperature -40°C to +85°C (-40°F to +185°F)
Operating humidity 5% to 95% non-condensing
Shock MIL-STD-202G compatible
Vibration MIL-STD202G compatible
MTBF 579,352 hours at 20°C
Weight 2.5oz (71g)
RoHS Compliant

DS-MPE-SER4M

The DS-MPE-SER4M is a rugged, low cost 4-port high speed PCIe MiniCard module that is ideal for serial I/O expansion in embedded and OEM applications. Extended temperature capability (-40°C to +85°C) enables the board to operate in environments with extreme temperature swings, such as vehicles or outdoor installations. In addition, the board may be custom-configured with 0-ohm resistors in place of jumper blocks for increased ruggedness in high-vibration environments.

DS-MPE-SER4M

Specifications

Number of serial ports 4
Protocols RS-232/422/485 on each port jumper or software configured
Maximum baud rate RS-232: 1Mbps
RS-422/485: 10Mbps
UARTs 16550 compatible
FIFO 256-byte TX/RX
ESD protection +/-15KV
Input power +3.3VDC +/-5%
Power consumption 0.462W @ 3.3V
Software drivers Windows XP
Linux 2.6.16, 2.6.27, 2.6.31, 2.6.32
Form Factor PCIe MiniCard full size
Dimensions 50.95 x 30mm (2 x 1.18")
Operating temperature -40ºC to +85ºC
Operating humidity 5% to 95% noncondensing
MTBF tbd
Weight 8.5g (0.3oz)
RoHS Compliant

DS-MPE-SER4OPT Opto

The DS-MPE-SER4OPT is a rugged, low cost 4-port opto-isolated PCIe MiniCard serial module that is ideal for serial I/O expansion in embedded and OEM applications.

Extended temperature capability (-40°C to +85°C) enables the board to operate in environments with extreme temperature swings, such as vehicles or outdoor installations. In addition, the board may be custom-configured with 0-ohm resistors in place of jumper blocks for increased ruggedness in high-vibration environments.

DS-MPE-SER4OPT Opto

Specifications

Number of serial ports 4
Protocols RS-232/485 on each port, configured in pairs
Maximum baud rate RS-232: 1Mbps
RS-485: 10Mbps
Termination RS-485 jumper selectable
UARTs Quad XR17V354 with PCIe interface
FIFO 256-byte TX/RX
Transceiver SP336 multi-mode
Isolation +/-500V input/output
Input power +3.3VDC +/-5%
Power consumption 0.462W @ 3.3V
Software drivers Windows 7, XP, Vista, 2000
Linux 2.6.16, 2.6.27, 2.6.31, 2.6.32
Form Factor PCIe MiniCard full size
Dimensions 50.95 x 30mm (2 x 1.18")
Operating temperature -40ºC to +85ºC
Operating humidity 5% to 95% noncondensing
MTBF tbd
Weight 8.5g (0.3oz)
RoHS Compliant

NVIDIA Solutions

NVIDIA Solutions

OSBOURNE

Osbourne is a versatile carrier board for the NVIDIA Jetson AGX Orin high-performance GPU module. It provides access to all I/O features of the Orin module and includes numerous sockets for I/O expansion. Osbourne has been designed to be used in almost any application ranging from commercial to industrial to airborne to rugged military use.

Key highlights of Osbourne include:

  • Industry-standard camera adapter socket for use with a wide range of CSI, GMSL, and other cameras
  • 10Gb Ethernet + 1GB Ethernet ports
  • Wide temperature operation – matching the range of the Orin module
  • Dual minicard sockets with PCIe and USB interfaces
  • Dual M.2 sockets for flash memory (M key 2242/2280) and network connectivity (E key 2230)
  • I/O concentrator connector enables use with standard and custom I/O breakout boards
OSBOURNE

STEVIE

STEVIE is a compact, low-cost, feature-packed carrier board solution for the NVIDIA Jetson AGX Xavier computer module. STEVIE measures 92 x 106mm (3.62 x 4.17"), just slightly larger than the AGX Xavier module (87 x 100mm). This small outline enables Stevie to provide the maximum amount of I/O and support full-size 2280 M.2 modules in the smallest possible size.

The table below lists the I/O features of the available Stevie configurations. In all respects not listed, all models are identical.

STEVIE
Model STV-BB01 STV-BB02 STV-BB03
Description Full featured model Single Ethernet model with all other features Cost reduced model
Ethernet 2 Gigabit Ethernet using dual stacked RJ-45 jack 1 Gigabit Ethernet using dual stacked RJ-45 jack; one port inoperative 1 Gigabit Ethernet using single RJ-45 jack
Serial ports 4 RS-232/422/485 4 RS-232/422/485 2 RS-232/422/485
Data Acquisition Microcontroller with 6 ADC, 2 DAC, 13 GPIO Microcontroller with 6 ADC, 2 DAC, 13 GPIO I2C GPIO expander with 16 GPIO lines
USB 2x USB 3.1, 2x USB 2.0 2x USB 3.1, 2x USB 2.0 2x USB 3.1, 2x USB 2.0
HDMI 2 2 2
CAN 2 2 2
Audio Yes Yes Yes
M.2 socket NVMe x4 2280 NVMe x4 2280 NVMe x4 2280
Mini PCIe socket 1 with PCIe and USB 1 with PCIe and USB 1 with PCIe and USB
Micro SD 1 Micro SD + UFS 1 Micro SD + UFS 1 Micro SD + UFS

JETBOX-STEVIE

JETBOX-STEVIE is a compact Nvidia Jetson AI computing platform ready to deploy. It includes the high performance Jetson AGX Xavier embedded computing module installed on our STEVIE carrier board with a Linux OS installed and preconfigured to support all the I/O on Stevie. Jetbox-Stevie offers the highest performance Jetson computing platform in the smallest available size.

JETBOX-STEVIE
Jetbox-Stevie features multiple expansion sockets for additional I/O and storage capacity to meet a wide range of application needs. Dual SMA antenna cutouts support the installation of WiFi and cellular modem modules for network connectivity. The enclosure is DIN rail mountable or can be used in a "table top" scenario.

The front panel includes 4 DB9 connectors which provide access to the 4 multi-protocol serial ports on Stevie. Two ports can be converted to CAN by replacing one of the cables with the accessory CAN cable included with the system.

ELTON

With its NVIDIA Xavier computing power, rugged design, and PCIe/104 expansion capability, Elton offers the ideal platform for implementing high performance computing and AI applications in mobile and harsh environments.

Elton utilizes the NVIDIA Jetson AGX Xavier embedded computer module to deliver unmatched performance for AI, machine learning, image processing, and other compute-intensive tasks. The Xavier module delivers up to 30 TeraOps in performance (3 x 1013 operations per second) at a maximum power dissipation of 30 watts. Xavier also offers scalable performance for applications requiring lower overall power consumption of 10 or 15 watts. The module runs at 32 TOPs on a 512-core Volta GPU with Tensor Cores and accelerators, enabling high-performance AI-powered autonomous machines like never before. At 87 x 100mm (3.4 x 3.9") it is slightly bigger than the other Jetson modules.

ELTON™ Carrier for Nvidia Jetson Xavier

FLOYD SC

The FLOYD SC compact carrier board converts the Nvidia Jetson Nano / TX2 NX / Xavier NX modules into complete embedded systems by providing interface circuitry, I/O connectors for all module features, camera interfaces, power supply, and additional I/O in a solution measuring only 4.3x3.3� / 110x85mm. A novel expansion I/O connector enables connection of standard and custom daughterboards with additional I/O functionality to simplify the development of customized Jetson solutions.

Floyd SC features up to 3 CSI camera inputs, 2 Gigabit Ethernet ports, 2 USB 2.0 ports, 1 USB 3.0 port, 1 RS-232 and 1 RS-232/485 serial port, 16 GPIO, and HDMI + DP display support. With the NX module installed a second Ethernet port and a CAN port are available. An M.2 M-Key NVME socket supports both 2242 and 2280 size I/O and flash storage modules. Wide voltage input 7-24V provides adaptability to a range of power supplies.

FLOYD SC

JETBOX FLOYD-SC

Jetbox-FloydSC provides a complete deployable solution for AI at the edge utilizing the Nvidia XN / TX2 NX / Nano compact GPU modules. JetBox-Floyd SC includes the Floyd SC carrier board and the selected Jetson module with Linux OS loaded, integrated into a compact steel + aluminum enclosure ready for use.

The integrated heat sink cover provides cooling – no fan is required. An internal M.2 socket supports up to 2TB additional storage beyond the flash included on the Jetson module. Shelf and DIN rail mounting are supported. A 12V AC adapter is included with the system.

With the NX module installed, one CAN port can be made available with an internal cable that replaces one of the serial ports on the front panel.

JETBOX FLOYD-SC

Floyd

The FLOYD carrier board converts the Nvidia Jetson Nano and Xavier NX modules into complete embedded systems by providing interface circuitry, I/O connectors for all module features, camera interfaces, power supply, and additional I/O. Camera inputs include 2 PoE Gigabit Ethernet ports, 3 MIPI/CSI 2/4-lane connectors, and 1 USB 3.0 port. MiniCard, M.2, and Micro SD sockets support I/O expansion and storage. FLOYD + NVIDIA redefine possibility; the combination of Nvidia’s performance/power efficiency and Diamond’s I/O enables a new generation of high-compute, low-cost solutions.

Floyd
Carrier Board Configurations

Floyd is available in two configurations: FLD-BB01 offers the complete suite of I/O features, while FLD-BB02 targets lower-cost applications requiring less I/O. The BB02 model also omits the PCIe switch needed for the BB01 additional I/O, thereby enabling a full PCIe x4 link to the M.2 socket for potentially higher flash memory read/write speeds.

Feature FLD-BB01 FLD-BB02
Gigabit Ethernet 2 1
PoE Both ports No
HDMI 2 1
Camera CSI 4-lane 3 3
USB 3.0 1 1
USB 2.0 2 2
M.2 2280 socket PCIe x1 PCIe x4
Minicard socket Full size PCIe No
SD card Yes Yes
GPIO 3.3V 8 8
Serial 2x RS-232/422/485 1x RS-232

1x RS-232/485

SCAN 2.0 1 (NX only) No

JETBOX-FLOYD

JETBOX-FLOYD is a compact Nvidia Jetson AI computing platform ready to deploy. It includes the Jetson Nano or NX module installed on our FLOYD carrier board with a Linux OS installed and preconfigured to support all the I/O on Floyd.

Jetbox-Floyd is available in four standard baseline configurations of Jetson module and baseboard features:

JETBOX-FLOYD
Feature JB-FLD-NAO-01 JB-FLD-NAO-02 JB-FLD-XNX-01 JB-FLD-XNX-02
Jetson module Nano Nano Xavier NX Xavier NX
Gigabit Ethernet 2 1 2 1
PoE Both ports No Both ports No
HDMI 2 1 2 1
Camera CSI 4-lane 3 3 3 3
USB 3.0 1 1 1 1
USB 2.0 2 2 2 2
M.2 2280 socket PCIe x1 PCIe x4 PCIe x1 PCIe x4
Minicard socket Full size PCIe + USB No Full size PCIe + USB No
SD card Yes Yes Yes Yes
GPIO 3.3V 8 8 8 8
Serial 2x RS-232/422/485 1x RS-232 1x RS-232/485 2x RS-232/422/485 1x RS-232 1x RS-232/485
CAN 2.0 No No 1 1

Ziggy

Ziggy offers a compact, low cost platform for evaluation of Jetson computer modules as well as implementation of a marketable solution for AI and machine learning applications. Ziggy provides access to the most popular I/O features of the Jetson modules, including camera, Ethernet, USB, and serial. In addition it features a unique data acquisition circuit with analog input, analog output, and digital I/O to enable Ziggy to interface to the "real world" of analog and digital sensors and controls.

Ziggy

DIAMOND SYSTEMS

Diamond Systems is a worldwide leading supplier of embedded computing solutions including small form factor single board computers and PC/104 I/O modules for communications, data acquisition, power supplies, audio and industrial I/O. ess-diamond-system-brochure.

Single Board Computers(SBCs)

JASPER

Jasper is a COM Express carrier board and SBC for Type 6 Basic (125x95mm) and Compact (95x95mm) modules. It is designed for applications that require ruggedness, a high level of I/O, or extended product lifetime. Notable features of Jasper include:

  • Rugged mechanical design with thicker PCB and latching connectors
  • Wide temperature operation - up to -40 to +85C (depending on the installed COM)
  • Built-in 16-bit data acquisition circuit with autocalibration
  • Dual minicard sockets with PCIe and USB interfaces
  • Dual M.2 sockets for flash memory and network connectivity
  • PCIe/104 expansion socket supporting x16 and x1 links
Saturn

Saturn

Saturn was designed from the ground up with a comprehensive set of features to meet the challenges of rugged environments and applications:

  • Memory is soldered down to avoid problems that can occur with commercial style SODIMM type memory modules
  • The 50% thicker PCB increases rigidity and improves reliability of fine pitch and high-ball-count BGA solder joints
  • All I/O connectors are latching for increased ruggedness
  • A bottom-side heat spreader provides more efficient cooling than a traditional heat sink. Processor and memory chips are both thermally connected to the heat spreader. In addition the exterior surface features recessed thermal pads for improved thermal connectivity to the system enclosure.
  • All components are rated and/or tested to ensure reliable -40 to +85ºC operation
Saturn

ATHENA IV

Athena IV is a member of Diamond’s 2-in-1 series of SBCs with integrated data acquisition. For applications requiring precision analog I/O, a 2-in-1 SBC is an ideal choice because it reduces the number of boards in the system, resulting in a system that is smaller, lighter, lower cost, and easier to assemble and maintain.

ATHENA IV

 
Specifications
COM-based architecture for long product life and performance scalability
Integrated professional quality data acquisition circuit saves space
Downward stacking PC/104 ISA bus connector supports a wide range of I/O modules for easy system I/O expansion
M.2 2230 SATA socket supports up to 128GB flashdisk
Form factor and most connectors backwards compatible with previous generations of Athena for easy product migration
Heat sink cooling
5VDC input voltage
4.2 x 4.5"
106 x 114mm
-40/+85ºC operation fanless
Windows 10 and Ubuntu Linux OS support
SBC features
Choice of E3845, E3940, or E3950 Atom CPU
4-8GB RAM soldered on COM
Up to 128GB eMMC Flash integrated onto COM
2x Gigabit Ethernet
VGA + Single-channel 24-bit LVDS
1 USB 3.0 port + 4 USB 2.0 ports
4x RS-232/422/485
HDA audio
7-pin SATA connector plus M.2 2230 socket
On-board RTC backup battery plus external battery connector
Data acquisition subsystem features
16 single-ended / 8 differential
16-bit resolution
16-bit A/D resolution
Unipolar and bipolar analog inputs
Single-ended and differential input configuration
16 single-ended / 8 differential
16-bit resolution
100KHz
Internal clock / external clock / software A/D triggering
Single-channel and multi-channel-scan A/D operation
Interrupts with FIFO to support reliable high-speed sampling
4 12-bit single-ended analog outputs
+/-10V, +/-5V, 0-10V and 0-5V output ranges
Autocalibration with Universal Driver software maintains accuracy over time and temperature
24 GPIO 3.3V & 5V
2 programmable counter/timers for A/D timing and general counting purposes

ZETA

The Zeta COM Express SBC family of ultra-small embedded computer boards combines a COM Express Mini CPU module with a same-size carrier board to create a complete embedded PC. Designed in the COM Express Mini Type 10 form factor (84 x 55mm/ 3.3 x 2.2 in), Zeta provides an ultra-compact, industry-standard form factor solution.

ZETA

Specifications

Core CPU Features
Processor/memory options Alder Lake-N: x7425E 1.5GHz 4C / E3845 4GB down

E3940 4GB down

N4200 8GB down

System I/O Interfaces
Serial Ports 4x RS-232/422/485
USB 4x USB 2.0

1x USB 3.0

Networking 2x Gigabit Ethernet
Keyboard/Mouse USB keyboard/mouse
Display LVDS single-channel VGA
Audio HDA audio via Daughterboard
Watchdog timer Reset mode; Programmable interval 0-255 seconds
Mass Storage 1x mSATA 1x Micro SD
Data Acquisition Features
Analog Inputs 16 single-ended / 8 differential 16-bit resolution
Input ranges 10V, ±5V, 0-10V, 0-5V
Maximum Sample Rate 100,000 samples/sec aggregate
On-board FIFO 2048 samples with programmable threshold
DAQ Calibration No calibration required
Analog Outputs 4 16-bit
Output ranges 0-5V, 0-2.5V
A Model Digital I/O 27 lines independently programmable
D Model Digital I/O 16 lines independently programmable for input/output
PWM 4 24-bit pulse width modulators
Counter / timers 8 32-bit counter/timers
Logic signal voltage levels 3.3V/5V logic levels jumper-selectable
Expansion Buses
MiniCard 1 socket combining PCIe x1, mSATA, and USB 2.0 interfaces
SATA 1 port on expansion connector
PCIe 2x PCIe x1 links on expansion connector
USB 1 USB 2.0 port on expansion connector
Physical and Mechanical
Power input 6V to 36V option
Cooling Heat spreader standard, no fan
Power Consumption TBD
Operating Temperature -40°C to +85°C
Form Factor COM Express Mini
Dimensions 3.30" x 2.16"

84 x 55mm

Weight 7.7 oz (220g)
RoHS Compliant

HELIOS

Helios is a low power, mid-range performance PC/104 form factor single board computer combining a highly integrated CPU with Diamond Systems’ renowned high-accuracy data acquisition circuitry on a single board, reducing size and cost while increasing ruggedness. Helios utilizes a Vortex integrated single chip CPU operating at 800MHz or 1GHz, and 256MB of DRAM soldered on-board.

HELIOS

Specifications

CPU Features
DMP Vortx86DX 800MHz / 1GHz
256MB down
On-board 2MB bootable flash drive with FreeDOS installed
4x USB 2.0
2x RS-232 +
2x RS-232/422/485
1x 10/100 Ethernet
1 IDE UDMA-100 port
Flashdisk interface
VGA, single-channel 24-bit LVDS
PC/104 ISA
-40°C to +85°C
Data Acquisition
±10V, ±5V, ±2.5V, ±1.25V, 0-10V, 0-5V, 0-2.5V
16-bit A/D resolution
Single-channel, multi-channel round robin, and multi-channel scan sampling
250KHz maximum sample rate
2048 A/D sample FIFO with programmable threshold
Interrupt-based A/D data transfer with FIFO support
Programmable input ranges
4 wide-range analog outputs with simultaneous update capability
12-bit D/A resolution
Multi-range autocalibration for highest accuracy
40 digital I/O lines with programmable direction
16-bit and 24-bit counter/timers
Field-upgradeable logic circuit for performance upgrades or custom designs

Venus 3.5 Inch Core i7/i5 SBC

Based on the "Skylake" or “Kaby Lake” 6th and 7th generation processors, Venus offers the highest available CPU performance in a small form factor rugged SBC with modest power consumption. It incorporates a full suite of rugged features such as soldered memory, latching connectors, a thicker PCB, and true -40/+85ºC operating temperature, making it suitable for the most demanding vehicle applications.

Specifications
Processor Skylake Gen6 Core i7-6600U 2.6GHz 2C
Kaby Lake Gen7 Core i7-7600U 2.8GHz 2C
Chipset Integrated onto processor package
Memory 4GB down +
4-16GB DDR4 SODIMM
Graphics LVDS dual-channel, HDMI, VGA
Ethernet 2x Gigabit Ethernet
USB 2x USB2.0
4x USB3.0/USB2.0
Serial 4x RS-232/422/485
Audio HDA audio with Line in, Line out, Mic in
Digital I/O 16 GPIO 3.3V/5V
Mass storage 1x SATA 7-pin
1x SATA-DOM
1x mSATA
Security TPM module Infineon SLB 9670XQ2.0
Expansion PCI/104-Express (PCIe + PCI)
2x PCIe MiniCard
Connectors Latching, JST GH / GHD series
Form factor 3.5 inch
Weight 12.4 oz (352g)
Cooling Conduction cooling heat spreader on bottom
Input voltage 9-18VDC
Power consumption 14W under typical operating conditions
Operating Temp -40° to +85°C

Helix PC/104 SBC

Diamond's family of Helix PC/104 SBCs combines mid-range CPU performance, standard PC I/O, and on-board data acquisition circuitry at a competitive price. Available PC I/O includes 3 or 6 USB 2.0 (model dependent), 4 serial ports (2 RS-232/422/485 and 2 RS-232), 1 10/100Mbps Ethernet, 1 Gigabit Ethernet port, and a SATA port. The data acquisition circuit includes 16 16-bit analog inputs, 4 16-bit analog outputs and 27 digital I/O lines configurable as counter/timers and pulse width modulators

Helix PC/104 SBC

Specifications

CPU
Processor DMP Vortex86DX3 1GHz
Memory 1-2GB down
Bus Interface PC/104 (ISA)
Display Support VGA, single-channel 24-bit LVDS
USB Ports 3x or 6x USB 2.0
Serial Ports 2 RS-232/422/485 ports
2 RS-232 ports
Networking 1 10/100Base-T Ethernet ports
1 Gigabit Ethernet port
Mass Storage 1x SATA 7-pin
mSATA flashdisk
Keyboard / Mouse PS/2
Audio HDA audio with Line in, Line out, Mic in
Analog inputs 16 single-ended /
8 differential
16-bit resolution
Input ranges ±10V, ±5V, 0-10V, 0-5V
Sample rate 100KHz maximum
On board FIFO 2048 samples, programmable threshold
DAQ calibration Autocalibration values stored in EEPROM
Analog outputs 4 16-bit
Output ranges 0-5V, 0-2.5V programmable
Digital I/O 19-27 GPIO 3.3V/5V
PWM 4 24-bit pulse width modulators
Watchdog Timer Programmable watchdog timer 0-255 seconds
Expansion socket PCIe MiniCard socket shared with mSATA
Expansion bus PC/104 (ISA) stackable I/O expansion
Input power 5VDC
Power Consumption 7.5W
Cooling Heat sink, no fan
Operating Temperature -40°C to +85°C
Shock MIL-STD-202G compatible
Vibration MIL-STD-202G compatible
Dimensions 3.550" x 3.775"
90mm x 96mm
Weight 2.5oz (71g)
MTBF HLX1000-2GA: tbd hours
RoHS Compliant

Aries PC/104-Plus SBC

The Aries PC/104-Plus single board computer from Diamond Systems uses the Intel “Bay Trail” E3800 series processor to deliver an unmatched combination of performance, price and power consumption. Packed with real-world features, Aries provides a complete solution for most embedded applications in a single board, saving you space, time, and money.

Aries PC/104-Plus SBC

Core System Functions
Processor Bay Trail E3845 1.91GHz 4C
Bay Trail E3826 1.46GHz 2C
Memory E3826 2GB down

E3845 4GB down

BIOS AMI PnP Flash BIOS
I/O Interfaces
Mass Storage 1x SATA-DOM
1x mSATA
Serial 4 RS-232/422/485 ports
USB 3 USB 2.0 ports & 1 USB 3.0 port
Networking 2 Gigabit Ethernet ports
Keyboard/Mouse USB keyboard/mouse
Display Support LVDS dual-channel
HDMI, VGA
DisplayPort
Audio HDA audio with Line in, Line out, Mic in
Watchdog timer Programmable timeout from 0 to 255 seconds
Data Acquisition Features
Analog Inputs 16 single-ended / 8 differential
16-bit resolution
A/D Resolution 16 bits
Input ranges ±10V, ±5V, ±2.5V,±1.25V, 0-10V, 0-5V, 0-2.5V
Max Sample Rate 250KHz
Protection ±35V on any analog input without damage
Nonlinearity ±3LSB, no missing codes
On-board FIFO 2048 samples, programmable threshold
A/D and D/A Calibration Autocalibration with software support
Analog Outputs 4, 16-bit resolution
Output ranges ±5V, ±10V, 0-5V, 0-10V programmable
Input impedance 10^13 ohms
Output current ±5mA max per channel
Settling time 10µS max to 0.012%
Relative accuracy ±2 LSB
Nonlinearity ±2 LSB, monotonic
Reset Reset to zero-scale or mid-scale (jumper selectable)
Digital I/O lines 22 programmable direction consisting of 1 8-bit port and 14 1-bit ports
Input voltage Logic 0: 0V min, 0.8V max
Logic 1: 2.0V min, 5.5V max
Input current 1µA at 3.3V, -5µA at 0V
Output voltage Logic 0: 0.0V min, 0.55V max
Logic 1: 2.0V min, 3.3V max
Output current Logic 0: 64mA max at 0.55V
Logic 1: 32mA max at 2V
Waveform generator 4 channel, 2048 x 18-bit buffer
Pulse width modulators 4 24-bit programmable
Counter/timers 8 32-bit
Expansion Buses
PC/104-Plus (ISA + PCI) stackable I/O
PCIe MiniCard 1 socket
Physical and Mechanical
Power Input +5VDC
Power Consumption E3845 CPU: 8.5W
E3826 CPU: 8.0W
Operating Temperature -40°C to +85°C
Operating Humidity 0-90% non-condensing
Shock MIL-STD-202G compatible
Vibration MIL-STD-202G compatible
Form Factor PC/104-Plus
Dimensions 4.5 x 4.0 in. (114 x 102 mm)
Weight 10.4oz (296g)
MTBF 150,240 hours at 20ºC
RoHS Compliant

GEMINI COM-Based SBC with WL8665UE CPU / COM Express Carrier

GEMINI is a COM Express Compact type 6 carrier board and SBC with PCI/104-Express I/O expansion. Feature-rich GEMINI offers the highest performance in a compact 4.0 x 4.0' / 102 x 102mm size, with its combination of COM Express CPU module and full support for PCIe/104 type 1 connectivity (PCI-104 up to 4 modules, PCIe-104 x1 up to 4 modules, and PCIe/104 x16). Gemini is designed to support a variety of COM Express modules including Bay Trail, Apollo Lake to Core i7 8th generation and Xeon.

GEMINI COM-Based SBC with WL8665UE CPU / COM Express Carrier

Specifications

Features
Processor Tiger Lake Gen11 i7

1185G7E / 1185GRE

Chipset Integrated onto processor package
Memory 16GB / 32GB DDR4 SODIMM
Display support 2x HDMI

Dual-channel

24-bit LVDS

Ethernet 2x Gigabit Ethernet
USB 4x USB 2.0

2x USB 3.0

Serial 4x RS-232/422/485
Audio HDA audio
Digital I/O 8 GPIO, 3.3V logic
Mass storage 1x PCIe Minicard

1x M.2 2242 SATA

1x SATA 7-pin

Security TPM module Infineon SLB 9670XQ2.0 on carrier (installed COM may also have TPM)
Expansion PCI/104-Express (PCIe + PCI)

PCIe MiniCard

Form factor PCI/104-Express
Weight 4.3 oz (121g)
Cooling Conduction cooling heat spreader on bottom
Input voltage 16V-34VDC
Power consumption Carrier board alone: 2.4W
Carrier board + WL COM + 16GB RAM: 10.2W
Vin = 28VDC
Operating Temp -40°C to +85°C