Protocol Analyzer

• Protocol Analyzer. eDP1.4a, eMMC 5.1, MIPI D-PHY, NAND Flash, SD 3.0, SD 4.1 (UHS-II), SGMII, UFS2.1
• Logic Analyzer. eMMC 5.1, NANA Flash, SD 3.0, Serial Flash (SPI NAND), SPI

System Requirements

• USB 3.0 port
• Win 7/8/10/11
• PC RAM 16GB

Digital Pattern Generator

• Channels: 16 (Output), 2 (Input)
• Data rate: 200 Mbps (Max.)
• Memory: 256 Mb/ch
• Phase tuning between channels
• Pattern source: Direct draw, Acute-LA/VCD, CSV (MIPI 13C, MIPI RFFE),...

System Requirements

• USB 3.0 port
• Win 7/8/10/11
• PC RAM 16GB

Logic Analyzer

• Channels: 68/136
• Timing analysis: 4 GHz
• State analysis: 400 GHz
• Memory: 32 Gb
• Protocol decode: SPI NAND,... (100+)
• Protocol trigger: eMMC5.1,... (30+)
• Protocol analyzer: SPI NAND,... (20+)

System Requirements

• USB 3.0 port
• Win 7/8/10/11
• PC RAM 16GB

6-in-1 Instruments

• PC-based, USB3.0 interface / Type C power
• Record length: 512 Mpts (Analog)/4 Gpts (Digital)
• DSO
  4 CH. Bandwidth: 200 MHz, Sample Rate: 1 GS/s
• 16 CH Logic Analyzer
  Sample Rate: 2 GS/s, State Analysis: 250 MHz
• Protocol Analyzer
  CAN 2.0B/CAN FD, eSPI, USB PD3.1, SVI3, SVID...
• Data Logger (HDD/SSD Storage)
• 3-digit DVM
• 5-digit frequency counter

System Requirements

• USB 3.0 port
• Windows 7/8/10/11
  Linux Ubuntu (64-bit)*, macOS*
• PC RAM 16GB

Mixed-signal Logic Analyzer

• PC-based, USB3.0 interface / power
• Memory: 2/4/8 Gb
• Channels: 8 or 16

Digital

• Sample Rate: 2 GS/s
• State Analysis: 200 MHz

Analog

• Sample Rate: 200 MS/s
• Bandwidth: 40 MHz
• ADC Bits: 12
• Input Voltage Range: +20 V

Protocol decode

• eSPI, CAN FD, 12C, SPI, Modbus, Profibus... (100+)
• Power sequence validation for 128 CH

System Requirements

• USB 3.0 port
• Windows 7/8/10/11
• PC RAM 16GB

Logic Analyzer

• PC-based
• USB3.0 interface / power
• Channels: 32
• Timing analysis: 2 GHz
• State analysis: 200 MHz
• Memory: 4/8 Gb
• Protocol decode: 13C, eSPI,... (100+)
• Protocol trigger: eMMC4.5, eSPI,... (30+)
• Protocol analyzer: eSPI, RGMII,... (20+)

System Requirements

• USB 3.0 port
• Win 7/8/10/11
• PC RAM 16GB

Logic Analyzer

• PC-based, USB3.0 interface / power
• Channels: 16
• Timing analysis: 800 MHz
• State analysis: 200 MHz
• Differential Ports (Isolation up to 1000Vrms): CAN2.0B/CAN FD, RS485, 10BASE-T1S
• Protocol decode: MIPI CSI/DSI LP, 13C,... (70+)
• Protocol trigger: DP_Aux, USB PD 3,... (20+)
• Protocol analyzer: Modbus, Profibus,... (10+)

System Requirements

• USB 3.0 port
• Win 7/8/10/11
• PC RAM 16GB

Differential Probe

• Power source: USB port / Battery
• Bandwidth: 25 MHz / 100 MHz
• Bandwidth limit: 5 MHz / Full
• Input voltage: +700V ~ 3500V
• Voltage withstand: ±2500V ~ 6000V
• Works for any DSO